Feeder belt

Introduction of coal feeder belt

The belt is the main part of the coal feeder, and it is also an important component of the coal feeder. The belt on the coal feeder is also called the conveyor belt. The design without interface in one forming determines the good anastomosis of the equipment, and the design of the toughness, anti-tear, anti-deviation and anti-break belt.

Material of coal feeder belt: polyester cotton ring

Coal feeder belt process: one - time molding without interface

The annular rubber belt adopts the one-time forming manufacturing process, and its characteristics are that there is no joint in the belt core, and the service life is not affected due to the early damage of the joint. The surface of the belt is smooth, the tension is even, so the belt runs smoothly and the elongation is small. The strength and anti-impact and anti-tearing ability of the annular rubber belt are greatly improved to avoid the belt breaking. The inner lining belt adopts anti-deviation structure, and a trapezoidal bar is cast in the middle of the annular belt, which has strong anti-deviation function and greatly overcomes the previous problems of belt deviation.

Suitable environment for coal feeder belt

The conveyor belt brought by A to the coal machine is polyester belt, suitable for working temperature between -10~400℃, and the material temperature shall not exceed 500℃. When the temperature exceeds 500℃, the elasticity of the tape will begin to disappear. If the temperature is too low, the tape will harden and crack. The purpose of the tape is to bear the load transfer traction force and the impact force of the material on the tape at the loading point.

Feed coal belt function

Patent anti-skid tape, which overcomes the problem of slipping and running off-track

1. Through the patent technology of belt grooving, the friction between the belt and the annular rubber belt is enhanced, and the problem of slipping is well solved.

2. The flame-retardant adhesive tape is made by one-time forming circular sealing process, which solves the problem that the belt feeder is connected with metal ring clasp, which is easy to cause tearing and deviating or breaking of the joint in the frequent and long-term operation, thus solving the stability problem of the adhesive tape in the harsh environment for a long time. Through the above measures, effectively solve the rubber belt in the running process of the problem of slipping, running deviation.

Physical drawing of coal conveyor belt